HT instruments EQUITEST5071 - Manual (Page 37)

EQUITEST 5071
EN - 35
8. CONNECTING THE INSTRUMENT TO THE PC
To transfer data to the PC, follow this procedure:
1. Install the TopView software found in the provided CD-ROM.
2. Install the C2006 cable driver found in the provided CD-ROM.
3. Launch TopView software. The following initial screen appears on the PC screen:
4. Switch on the instrument and leave it in any reading screen.
5. Connect the optical connector of the C2006 cable to the instrument (side in the shape
of an “8”) and the other end to a USB port of the PC.
6. Click on key “PC-InstrumentConnection” of the TopView software. The following
screen appears on the display:
7. Use the keys “Detect instrument” and “Autoset” until the instrument is detected.
8. Click on key “Forward” and follow the guided procedure of the software.
For any detail regarding the analysis of the results, please refer to TopView ON-LINE
HELP