GW Instek GDM-356 - Manual (Page 22)

22
l The included temperature probe can only be measured
up to 250
o
C For any mesaurement higher than that,
the rod type temperature probe must be used instead.
l When temperature measeuremnet has been completed,
disconnect the connection between the testing leads
and te circuit under test.
Measurement Operation(10)
H.Capacitance Measurement (see figure 10)
( figure 10)
Capacitance measurement has 4 measurement positions
on the rotary switch: 20nF, 200nF, 2
µ
F and 100
µ
F.
To measure capacitance, connect the Meter as follows:
1. Insert the red test clip or red test lead into the V
Ω
terminal and the black test clip or black test lead into
the terminal.
2. Set the rotary switch to an appropriate measurement
position in Fcx range.
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
GDM-356