GW Instek GDM-8300 series Excel Add-in Operation Guide - Manual (Page 9)

SETUP
9
2. Opening GDM-834x Excel Addins will
automatically open an Excel Spreadsheet.
If asked by Windows to enable Macros, choose
Enable Macros.
3. For Excel 2007 and up: Go to the Add-Ins tab in
the Ribbon UI.
For older versions such as Excel 2003: Go to the
Tools menu and select the Add-Ins option.
4. The Add-In will be shown in a custom tool bar.
5. Click on the Connect to Multimeter icon.
6. In the Connect window that appears, click Search
to scan for the DMM.
7. After the DMM has been detected, click on the
COM port that the DMM is connected to (see
page 8). If the model name and serial number of
your device are not returned, click the Search key
again.
8. Press Connect.