GW Instek GDM-8300 series Excel Add-in Operation Guide - Manual (Page 14)

GDM-834X Series Excel Add-In Manual
14
4. To select the logging interval, configure the With
Interval option. This option can set how often the
DMM will trigger, down to the number hours,
minutes and seconds between each measurement.
5. Use the Terminating Upon panel to set when to
stop the data logging.
 Number of Readings: Configures the logger
to stop after a set amount of measurements.
 Duration: Sets the logger to stop logging
measurements after a set amount of time or
number of readings.