beautypg.com

Setup, Connection, Etup – GW Instek GDM-8300 series Excel Add-in Operation Guide User Manual

Page 5

background image

SETUP

5

S

ETUP

Connection

Before using the Excel Add-In you must set the baud rate for the DMM in the

USB menu. This configuration will be used when using the software to
connect to the DMM remotely.

Note: This Add-In cannot be used with the GPIB option.

1. Connection

1. Connect the rear panel USB B port on the DMM

to a USB port on the PC using a Type A to Type B
USB cable.

CAL

IBR

ATIO

N

USE

ON

LY

2. Configure the
DMM

2. Press MENU.
3. Go to I/O on level 1.
4. Go to USB on level 2.
5. Set the baud rate to an applicable rate.
6. Press Enter to confirm the baud rate settings.
7. Press EXIT to exit from the USB menu.

See also other documents in the category GW Instek Equipment: