GW Instek GDS-3000 Series GUG-001, GPIB to USB adapter User Manual - Manual (Page 7)

GETTING STARTED
G
ETTING STARTED
The Getting Started chapter introduces the
features, functions and appearance of the GUG-
001 GPIB to USB adapter.
Main Features
The GW Instek GPIB to USB adapter is used to connect a GPIB
controller to the USB B receptacle on the GDS-3000 as the scope does
not have a GPIB interface. The GUG-001 GPIB to USB adapter is
currently only supported on the GDS-3000.
Features  Enables GPIB control of the GDS-3000 via the
USB B receptacle.
 No power adapter, all power requirements from
USB.
 The GPIB primary address can be assigned via
the GDS-3000.
Accessories  User manual, USB type A-B cable.
7