GW Instek GDS-3000 Series GUG-001, GPIB to USB adapter User Manual User Manual

Page 10

GUG-001 User Manual

3. Press USB Device Port from the

side menu and choose Computer.

4. Press GPIB from the side menu.

5. Use the variable knob to set the

GPIB address from the side menu.

Range

1 ~ 30

Limitations



Only the GDS-3000 can be used to change the
GPIB address from the default GPIB address of
1.



GPIB secondary addresses are not supported.

Trouble Shooting

If the Ready indicator will not come on:



Check that the cables are correctly inserted.



Ensure the USB device powering the adapter is
turned on and is functioning correctly.