GW Instek GDS-3000 Series GUG-001, GPIB to USB adapter User Manual - Manual (Page 14)

GUG-001 User Manual
A
PENDIX
GUG-001Specifications
USB Specification USB Device USB 2.0 full speed device interface
GPIB Specification The GPIB interface of this device corresponds to the
standard of IEEE488.1-1987, IEEE488.2-1992.
The GPIB interface functions are listed as following:
SH1(Source
Handshake): This device can transmit multilane
messages across the GPIB.
AH1(Acceptor
Handshake): This device can receive multilane
messages across the GPIB.
T6(Talker): Talker interface function includes basic
talker, serial poll, and un-address if MLA
capabilities, without talk only mode
function.
L4(Listener): This device becomes a listener when
the controller sends its listen address
with ATN (attention) line asserted. This
device dose not have listen only
capability.
SR0(Service
Request): This device has no SRQ (Service
Request) function.
RL0(Remote/Local): This device will ignore the LLO (local
lockout) command.
PP0(Parallel Poll): This device has no “Parallel Poll”
interface function.
DC1(Device Clear): This device has “Device Clear”
capability to return the device to power
on status.
DT0(Device
Trigger): This device has no “Device Trigger”
interface function.
C0(Controller): This device can not control other
devices.
14