Iv - appendix, Iv - 1. ipdact-ud technical specifications, Iv - 1 – Fire-Lite IPDACT-2UD Technical Reference User Manual
Page 40: Power supply, Dimensions and weight, Environmental specifications, Lan port, Upload/download modem, Other characteristics

IPDACT-UD - Appendix
IV-37
Doc.DM385-I
Rev. 2.0
IV - Appendix
IV - 1. IPDACT-UD Technical Specifications
Power Supply
NOMINAL VOLTAGE RANGE
10 V
DC
– 24 V
DC
MAX CURRENT
1
12V: Idle: 180 mA Alarm: 230 mA
Transient
2
: 400mA
24 V: Idle: 104 mA Alarm: 130 mA
Transient
2
: 200mA
Dimensions and weight
LENGTH x WIDTH x HEIGHT
149 x 117 x 22 mm
WEIGHT 150
gr
Environmental Specifications
OPERATING TEMPERATURE
0º to 49º C (32º to 120º F).
RELATIVE HUMIDITY
Maximum: 93%
LAN Port
CONNECTOR RJ45
female
SPEED 10
Mbps
PROTOCOLS
UDP, IP, ARP, DHCP, Telnet, Ethernet Blue Book
Upload/Download Modem
SPEED
From 75 bps up to 14400 bps
STANDARDS
Bell202, V.23, Bell 103, V.21, V.22, V.22bis, V.32, V.32bis
COMPATIBLE CONTROL PANELS Ademco Vista12, Ademco Vista48, Paradox Spectra, General Electric
NetworX, Firelite 9200UD, Firelite 9600
Other Characteristics
OUTPUT1 and OUTPUT2
500mA max. if V
≤ 30 V
DC
for resistive loads
INPUT1 and INPUT2
Normally Open, 1K EOL supervised.
1
The IPDACT-UD power consumption should be subtracted from the maximum power of the output
delivered by the control panel. A 750mA power source is recommended in all cases.
2
Transient lasting 75ms is produced when the control panel takes over the telephone line to call the control
center.