Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 98)

2.14.3. Operation methods
(1)Loading the file
The color difference coefficient data is loaded from a file in which it was saved.
1) Click [Open] on the [File] menu. The file selection dialog box now appears.
2) Select the file, and press the [OK] button.
3) The data of the selected file is now displayed.
(2)Creating and editing the color difference coefficient data
The color difference coefficient data is edited.
1) Input the data in a range from 0.0000 to 1.0000.
2) Input the name of the data in "Name." This name can consist of a maximum of 20 characters.
(3)Saving the file
The displayed data is saved in a file.
When [Save] on the [File] menu is selected, the data is saved in the selected file and any existing data in that file is
overwritten.
When [Save As] on the [File] menu is selected:
1) The file selection dialog box appears.
2) Input the filename, and press the [OK] button. The displayed data is now saved in the new file.
(4)Sending the color difference coefficient data
The color difference coefficient data is saved in the VG.
1) Click [Send] on the [VG] menu. The send dialog box appears.
2) Set the number of the data table.
3) Select the [OK] button. The color difference coefficient data is now sent to the VG. (The table number of the data
sent now replaces the previous number appearing in [Table No.].)
(5)Receiving the color difference coefficient data
The color difference coefficient data from the VG is loaded.
1) Click [Receive] on the [VG] menu. The receive dialog box appears.
2) Set the number of the data table.
3) Select the [OK] button. The reception of the color difference coefficient data now starts. (The table number of the
data received now replaces the previous number appearing in [Table No.].)
(6)Printing the color difference coefficient data
The displayed color difference coefficient data is printed.
1) Click [Print] on the [File] menu.
2) The print dialog box appears. Set the block numbers to be printed and the margins here.
3) Press the [OK] button. The displayed color difference coefficient data is now printed.
4) To change the printer which has been set, click the [Set Printer...] button.
5) The printer setting dialog box appears.
90