Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 95)

Chapter 2 Operation
87
2.13. Setting the port number and IP address
This section describes how to set the port number and IP address for the individual VGs
which are connected serially.
2.13.1. Startup method
Select [Start]
→ [Programs] → [SP-8848] → [IPAddressSet].
2.13.2. Window screen and description
No. Item Details
Port No. The number of the VG's port is set here.
Serial settings Com port: The port number is selected here.
Speed: The transfer (baud) rate is set here.
Data Size: The communication data size is set here.
Parity: "Even," "Odd" or "None" is selected as the parity here.
Stop Bits: "1," "1.5" or "2" is selected as the stop bits.
IP address The IP address of the VG is set here.
Send Set Internet Protocol address is transmitted to VG.