Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 52)

No. Item name Details
Set HDMI output mode. Select from OFF, HDMI, HDMI1.1, DVI, or AUTO.
Select the video format. Select from RGB, Y444, Y422_16, Y422_20, or
Y422_24.
Set the format of the video level. Select from Full range, Limited range, or USER.
If “USER” is selected, it is possible to input setting range by video format.
RGB, Y444, Y422_16 = 0 to 255
Y422_20 = 0 to 1023
Y422_24 = 0 to 4095
Select the output signal of the HDMI standard. Select from OFF, TOSLINK,
COAX, ANALOG or INTERNAL.
Set the frequency. Select from
.
Set the audio bit width. Select from 16bit, 20bit or 24bit.
Set the internal Sweep. Select from OFF or Freq.
Set the audio output level. The max value differs by the setting of AudioWidth
item.
16bit : 7FFF
20bit : 7FFFF
24bit : 7FFFFF
Set the output frequency. The max value differs by the setting of
AudioSampleFreq item.
Set the value of YPbPr. Input the appropriate number.
Display NEGA and POSI that is set in the part of “OUTPUT”.
Set the value of the Repetition. Set among 1 to 10.
InfoFrame Setting
button
ACP Setting button
AFD Setting button
44