Detcon CXT-N7 - Manual (Page 26)

Model X40
Model X40 Instruction Manual Rev. 0.0 Page 20 of 23
5.
Troubleshooting Guide
Problem Potential Fix
Unit will not Power Up
→ Check for correct AC or DC voltage selection.
→ Check for correct VAC and VDC powering configuration.
Relays are not firing → Check that the alarm relays are configured properly
Alarms on constantly
→ Insure that no channels are set to ascending or descending
incorrectly.
Alarm Firing causes unit to ‘Lock-
Up’ → Check that Alarm Annunciators current draw does not
exceed the on-board Power Supply limitations. Replace with
external Power Supply if necessary.
Contact the Detcon Service Department for further troubleshooting assistance at 281-367-4100.
6.
Warranty
Detcon, Inc., as the manufacturer, warrants under intended normal use each new Model CXT-N4X
controller to be free from defects in material and workmanship for a period of one year from the date of
shipment to the original purchaser. Should the controller fail to perform in accordance with published
specifications within the warranty period, return to Detcon, Inc., for necessary repairs or replacement. All
warranties and service policies are FOB the Detcon facility located in The Woodlands, Texas.