Detcon IR-700 - Manual (Page 43)

Model IR-700
IR-700 Instruction Manual Rev. 3.1 Page 39 of 40
9.3 Model IR-700 Engineering Drawings
1) IR-700 Series Breakaway and Wiring
2) IR-700 Series Wiring and Dimensional, 316 SS condulet
3) IR-700 Series Wiring and Dimensional, Aluminum condulet
10. Revision Log
Revision Date Changes made Approval
2.1 12/08/10 Changed ATEX certification line under Electrical Classification
in Section 9.1 from “Eex d IIB+H
2
T4” to “II 2 G Ex d IIB+H2
T4” to match ATEX approval label for IR-700. Added Revision
Log Section 10.
B.M.
2.2 04/25/11 Removed Teflon note in Section 2.5. LU
2.3 07/11/11 Added aluminum condulet wiring and dimensional drawing.
Inrush current information added to specifications.
Electrical connections changed from six to five wires. LU
2.4 04/16/12 Changed cable recommendation, updated the Modbus Register
Map. LU
2.5 01/08/13 Updated ATEX approvals label, updated EN standards that
sensor assembly meets. Updated ATEX listing in specifications BM
2.6 04/02/13 Updated ATEX installation instructions regarding use of ring
terminal for earth ground using screw and lock-washer. Updated
guidelines for metric special fasteners used in 700 assembly BM
2.7 04/05/13 Added 50% LEL Range LU
2.8 10/17/13 Updated for 4-30mA errors LU
2.9 11/20/2013 Update Field Wiring LU
3.0 12/25/13 Update Calibration to include Wind Guard BM
3.1 02/14/14 Update 4-20mA wiring, and specifications BM