COSA Xentaur SF6 Purity Pro - Manual (Page 9)

9
2-3. Saving Data
2-4. Initial Display (Self-Diagnostic Display)
Once the SAVE key is pressed, the buzzer will beep and the
display shown right will appear. The time, data, and the
measurement result are saved chronologically from No. 001
to No. 100. The saved data can be seen at “VIEW SAVED
DATA” in the SETTING MODE. Also, the saved data can be
deleted with “CLEAR SAVED DATA” in the SETTING MODE.
After starting with the MEASURING MODE by pressing the
POWER key, the self-diagnostic function will automatically
begin to work. If the result is normal, the display shown to
the right will appear.
If any problems occur, it will be indicated as shown in the
display at right. The display exemplifies a contamination of
the interferometer. If the problem becomes serious, the
display will not switch to the basic display , but instead the
ERROR message display.