COSA Xentaur SF6 Purity Pro - Manual (Page 15)

15
3-2. Adjusting the Time (SET DATE/TME)
The initial position of the cursor is on YEAR. Change this with the
keys and fix the setting with the ENTER key. The cursor
then moves to DAY. Select the DAY, MONTH, HOUR and MINUTE
by the same procedures as YEAR. HOUR is displayed through a
24-hour clock.
3-3. Confirming the Saved Data (VIEW SAVED DATA)
On the first line, the data number is shown. On the second and third lines, the saved data and time
are displayed. Select the data with the keys and fix the selection with the [ENTER] key. The
saved data will then appear. At displaying the saved data, the measuring gas and the base gas are
displayed with white letters on a black background. The CANCEL key leads to the initial display in
Setting Mode.
3-4. Clearing the Saved Data (CLEAR SAVED DATA)
Select the “CLEAR SAVED DATA” with the keys
and fix the selection with the ENTER key. If you want to
cancel the action, select “CANCEL” and press the
[ENTER] key.
3-5. Start the Measurement (START MEAS.)
If you would like to start the measurement right after
Setting each item, select “START MEAS” with the
keys and press the [ENTER] key. The display
will then turn to the Measuring Mode.