Avigilon Software House CCURE 9000 Integration - Manual (Page 9)

Avigilon Control Center 5 System Integration with Software House C•Cure 9000
6
Avigilon Configuration
Once the required licence and software have been installed, configure the Avigilon
Control Center for the integration.
See the Avigilon Control Center Client User Guide for more information about each of the
required configurations.
Assigning Logical IDs to Cameras
In the Avigilon Control Center Client software, assign a logical ID to each camera. The
C•Cure software will only detect cameras with a logical ID. By default, cameras do not
have a logical ID.
1. In the Avigilon Control Center Client software, right-click a camera in the
System Explorer and select Setup.
2. In the camera Setup tab, click General.
3. In the General dialog box, enter a Logical ID for the camera.
The logical ID must be unique number.
The logical ID should have no more than nine digits.
Adding an Integration User in Avigilon
To protect the security of the Avigilon Control Center Server, add a user to the Avigilon
software specifically for connecting to the integration. See the Avigilon Control Center
Client User Guide for details about how to add users.