Avigilon Software House CCURE 9000 Integration - Manual (Page 6)

Avigilon Control Center 5 System Integration with Software House C•Cure 9000
3
b. Clear the Enabled check box then click Save and Close.
c. Open Video Server Editor window again, then update the
Communication Port number.
d. Select the Enabled check box then click Save and Close.
2. After the integration upgrade has been installed, manually remove the
previous version from Windows through the Programs and Features window.
3. Avigilon Control Center 5 features the ability to combine multiple servers into a
Site, and allow settings to be shared between all servers in a Site. To use this
feature, combine the servers in your system into a Site before you update the
integration settings. Once the servers are combined into a site, you only need
to initiate camera import from one server to import all cameras in the Site.
For more information about combining servers into Sites, see the Avigilon
Control Center Client User Guide.
For More Information
For more detailed information about the procedures outlined in this guide, refer to the
specific software documentation.
• Avigilon Control Center Client User Guide
• Avigilon Control Center Server User Guide
• C•Cure Help
• C•Cure Server Management Application User Guide
• C•Cure Licensing User Guide
Installation
All C•Cure services and components must be turned off before the integration can be
installed.
The Avigilon-C•Cure integration software ( AvigilonCCURE2.20Integration.exe ) must be
installed on either a server or client that is connected to your C•Cure system.
NOTE: Integration upgrades can be installed on any machine that was previously running
the integration.