Avigilon Software House CCURE 9000 Integration - Manual (Page 12)

Avigilon Control Center 5 System Integration with Software House C•Cure 9000
9
Adding Server Alarms
You can create a server alarm that is triggered by the Avigilon server’s online or offline
status.
1. Open the C•Cure Administration Workstation.
2. In the Video Tree pane, right-click the Avigilon server and select Edit.
3. In the Video Server Editor, select the Alarms tab then click Add.
4. In the Property column, select Video Server Alarm.
5. In the Values column, select what triggers the alarm — when the server
becomes Offline or Online.
6. In the Action column, select how you want C•Cure to respond to the alarm.
7. If you selected Video Camera Action, select the Action Type tab and select
the server and camera that will perform the action.
8. In the Schedule column, select when the alarm can be triggered.
9. Click Save and Close.
Adding Camera Alarms
You can add a camera alarm that is triggered by a camera event, like motion detection.