Avigilon Software House CCURE 9000 Integration - Manual (Page 5)

Avigilon Control Center 5 System Integration with Software House C•Cure 9000
2
Client Requirements
The following table lists the minimum requirements for a Client that uses the integration
for viewing video:
Upgrading from Avigilon Control Center 4
If you are upgrading to Avigilon Control Center 5 and the latest version of the Avigilon
C•Cure integration software, there are a few steps that need to be performed before you
can use the integration again.
1. The Avigilon Control Center uses a new default port number (38880) for server
communication. After you install the Avigilon Control Center 5 software, you
must update the port number used by either the Avigilon Control Center
software or the C•Cure software.
o To change the default port number for the Avigilon Control Center
software, change the server network settings in the Avigilon Control
Center Admin Tool. For more information, see the Avigilon Control
Center Software User Guide.
o To change the port number used by the C•Cure software to
communicate with the Avigilon Control Center software, first disable the
Avigilon Video Server connection then update the communication port
number.
a. In the C•Cure Administration Workstation, select the Video tab and
open the Video Server Editor window for the Avigilon server.
Video card n/a
Network card 1 Gbps Intel Pro/1000 or Broadcom NetXtreme II Server
Adapters
Hard drives SATA-II 7200 RPM Enterprise Class Hard Drives
Minimum Requirements
Monitor resolution 1280 x 1024
OS Windows XP with Service Pack (SP) 2 or later, Win-
dows Vista, or Windows 7 (32-bit or 64-bit)
CPU Intel Single Core 2.4 GHz processor
System RAM 1 GB
Video card PCI Express, DirectX 9.0c compliant with 128 MB
RAM (Intel GMA 900 or better, NVIDIA 6600 or bet-
ter, ATI X1300 or better)
Network card 100 Mbps
Hard disk space 500 MB
Recommended Requirements