Avigilon Access Control Manager Integration - Manual (Page 8)

3. On the Select Alarm Trigger Source page, select External Software Event from the Alarm Trigger Source:
drop down list. Click after you complete each page.
4. On the Select Linked Cameras page, select the cameras to link to this alarm, and set the Pre-Alarm
Record Time: and Recording Duration:.
5. On the Select Alarm Recipients page, select the Control Center user that was added for the integration.
You can also add any other groups or users that need to be notified when this alarm is triggered.
6. (Optional) If you would like to trigger an action when an alarm is acknowledged, select Activate selected
digital output(s) on alarm acknowledgement check box.
a. Select the digital outputs to be activated and specify the duration.
b. Select Require user confirmation before activating digital output(s) check box if the user needs to
confirm the alarm before the digital output action is initiated.
7. Enter a name for the alarm and set the alarm priority. The alarm name is used to identify the alarm during
the integration.
8. Ensure Enable alarm check box is selected then click .
Alarm Gateway
The Alarm Gateway is composed of two parts: the Windows service that runs automatically in the background,
and the Configuration Tool software that is used to map alarms between the two systems.
Configuring Server Settings
Configure the Alarm Gateway to access the two applications.
After you install the integration software, the Configuration Tool automatically opens the Configure Connections
window.
5 Alarm Gateway