AST AST4100 Datasheet - Manual (Page 2)

TM
www.astsensors.com © 2014 American Sensor Technologies Inc. AST4000/4100/4200 03/13/2014.
All specifications subject to change without notice.
Ordering Information
Pressure Ranges +
+ Typical ranges. All ranges between 0-25 PSI and 0-10,000 PSI available. **Compound ranges up to -14.7 to 500 PSI available. Please consult factory.
PSIG Measurement Range
-14.7 to 25**
Pressure Range Code
V0025**
BARG Measurement Range
-1 to 2**
Pressure Range Code
V0002**
0-25 00025 0-2 00002
0-50 00050 0-5 00005
0-100 00100 0-7 00007
0-150 00150 0-10 00010
0-200 00200 0-20 00020
0-250 00250 0-35 00035
0-500 00500 0-50 00050
0-1,000 01000 0-100 00100
0-2,500 02500 0-250 00250
0-5,000 05000 0-350 00350
0-7,500 07500 0-500 00500
0-10,000 10000 0-700 00700
Process Connection*
A= 1/4” NPT Male   
B= 1/8” NPT Male   
C= 1/4” BSPP Male   
F= 7/16” - 20 UNF Male   
J= 1/8” NPT Female 
K= SAE4 Female 
P= 1/2” NPT Male 
V= 1/8” BSP Female 
Pressure Unit   
B= Bar K= kg/cm 2 P= PSI
Wetted Material
0= 17-4PH    1= 316L   2= Inconel 718 
Outputs   
1= 0.5-4.5V ratiometric
3= 1-5V
4= 4-20mA (2 wire loop powered)
6= 1-6V
A= 10mV/V
Electrical
A= 2 ft. (0.6m)   
B= 4 ft. (1.2m)   
C= 6 ft. (1.8m)   
D= 10 ft. (3.0m)   
E= Mini DIN 43650  
F= Packard Metripack 150 3-Pin  
G= 4-pin Molex (no housing)  
I= DIN 43650A  
K= Deutsch DT04-3 Pin  
Y= M12x1 Eurofast 
Z= Deutsch DT04-4 Pin  
Series Type
AST4000= Industrial Grade 
AST4100= Compact 
AST4200= Panel Mount 
Pressure Range   
Insert 5-digit pressure range code
Options (contact factory for additional options)
000= No Options   
006= Schrader Depressor Pin (only available with process connection “K”) 
143= Schrader Depressor Pin & Sealed Gauge References (only available with process connection “K”) 
AST4000 A 00500 P 4 0 000 E
* “B” and “F” not available under 50PSI (“B” not available in 316L)
(for wiring information visit: http://www.astsensors.com/wiring.php)