AST AST2000H2 Datasheet User Manual
Ast2000, Hydrogen pressure sensor, Bond krystal
American Sensor Technologies
•
450 Clark Dr., Mt. Olive, NJ 07828
•
phone (973) 448-1901
•
fax (973) 448-1905
•
email: [email protected]
TM
Technology
by AST
TM
Bond
Krystal
Overview
The AST2000 series is now available for hydrogen pressure sensing
applications. Tested to a variety of hydrogen and automotive standards,
the AST2000 series combines the best mechanical design for hydrogen
measurement with high performance digital compensation.
Benefits
l
One piece design
l
All 316L wetted material for optimal compatibility
l
No oil-filled cavities leave no chance of containment
l
Non-welded diaphragm eliminates leak paths and weak points
l
Digitally compensated
l
Krystal Bond™ Technology
Applications*
l
PEM Fuel Cells
l
Hydrogen Storage
l
Hydrogen Filling Stations
l
Test Stands
l
Back Up Power
* Lean more about Hydrogen pressure measurement
(Hydrogen Applications)
Approvals
l
EC79 (applicable to table below)
l
CE EN61326 (all models)
AST2000
Hydrogen Pressure Sensor
316L Stainless Steel, Media Isolated Pressure Sensor for Hydrogen Applications
Electrical Data
Output
0.5-4.5V ratiometric**
Excitation
5VDC regulated
Output Impedance
<100 Ohms, Nominal
Current Consumption:
<10mA
Bandwidth
-(3dB): DC to 3kHz
Output Noise:
<2mV RMS
Zero Offset
+/-0.5% of FS
Span Tolerance
+/-0.5% of FS
Output Load:
10K Ohms, Min.
Reverse Polarity Protection
Yes
Environmental Data
Temperature
Operating
-40 to 85°C (-40 to 185°F)
Storage
-40 to 125°C (-40 to 250°F)
Thermal Limits
Compensated Range
-10 to 60°C (14 to 140°F)
Thermal Error
+/- 2% of FS
Other
Shock
100G, 11 msec, 1/2 sine
Vibration
20G peak, 20 to 2400 Hz.
EMI/RFI Protection:
Yes
Rating:
IPX6K
Performance @ 25°C (77°F)
Accuracy*
< ±0.5% BFSL
Stability (1 year)
±0.25% FS, typical
Over range Protection
2X Rated Pressure
Pressure Cycles
> 100 Million
* Accuracy includes non-linearity, hysteresis & non-repeatability
TUV
Approval
Files
Pressure
Range
Burst
Pressure
07-01820/1-TUV
20 Bar (2MPa)
600 Bar
EC79
20 Bar (2MPa)
600 Bar
EC79
350 Bar (35MPa)
2800 Bar
EC79
700 Bar (70MPa)
2800 Bar
**4-20mA and 1-5V outputs available, contact factory