AST AST44LP Datasheet - Manual (Page 2)

www.astsensors.com
TM
© 2014 American Sensor Technologies Inc. AST44LP 06/18/2014.
All specifications subject to change without notice.
Ordering Information
Process Connection
A= 1/4” NPT Male
C= 1/4” BSPP Male
I= 1/4” NPT Female
P= 1/2” MNPT
Pressure Unit
H= Inches H
2
O P= PSI
Wetted Material
1= 316L 4= Hastelloy
Outputs
3= 1-5V 4= 4-20mA (2 wire loop powered) 6= 1-6V
Electrical
A= 2 ft. (0.6m)
B= 4 ft. (1.2m)
C= 6 ft. (1.8m)
D= 10 ft. (3.0m)
E= Mini DIN 43650
F= Packard Metripack 150 3-Pin
I= DIN 43650A
L= Conduit, Cable 2 ft. (0.6 m)
M= Conduit, Cable 4 ft. (1.2 m)
N= Conduit, Cable 6 ft. (1.8 m)
P= Conduit, Cable 10 ft. (3 m)
R= Bendix 6 Pin
4 = Mini-Fast (CSA Only)
Y= M12x1
Series Type
Pressure Measurement
Insert 5-digit pressure code
Options
000= No Options
AST44LP A 00005 P 4 1 000 E -SS
(consult factory on availability)
Pressure Ranges
PSIG Measurement
0-1
Pressure Code
00001
0-2.5 + 00069
0-5 00005
0-7.5 + 00208
0-10 00010
0-15 00015
+ 2.5 and 7.5 PSI Sensor must be ordered in inches of H
2
O.
Note: CSA approved products require case/earth ground electrical connection.
See wiring installation sheet for further details
Approval
(Left Blank)= UL ANSI/ISA 12.12.01 Class I Div 1 Intrinsically Safe Groups C, D (formerly UL913)
-SS= Add “-SS” for CSA157 Class I Div 1 Groups C, D Intrinsically Safe and ANSI/ISA 12.27.01 Single Seal Approval and SIRA ATEX Exia IIB
Class I, Zone 0, T4