AST AST46PT Datasheet - Manual (Page 2)

TM
www.astsensors.com © 2014 American Sensor Technologies Inc. AST46PT 01/30/2014.
All specifications subject to change without notice.
Ordering Information
Pressure Ranges Wiring
Output
Power Connections Output Connections
Green Length
Red Black White Blue
Voltage +V Supply -V Supply Pressure Temp.
Case
Ground
4.3"
4.68"
4-20mA +Pressure -Pressure -Temp. +Temp.
Case
Ground
4.8"
5.18"
For U.S. installations, sensor case ground (green wire) must be
bonded to ground according to Article 501 & 505 of the NEC.
Pressure Ranges
++ 2.5 and 7.5 PSI units must be ordered in inches of H
2
O
Pressure PSI
0-1
Pressure Code V
ented
G 0001
Pressure PSI
0-100
Pressure Code Factory Sealed
0 0100
0-2.5 ++ G 0069 0-200 0 0200
0-5 G 0005 0-500 0 0500
0-7.5 ++ G 0208 0-1,000 0 1000
0-10 G 0010 0-1,500 0 1500
0-15 G 0015 0-2,500 0 2500
0-25 G 0025 0-3,000 0 3000
0-50 G 0050 0-5,000 0 5000
0-100 G 0100 0-7,500 0 7500
0-200 G 0200 0-10,000 1 0000
0-500 G 0500 0-15,000 1 5000
0-1,000 G 1000 0-20,000 2 0000
Pressure Unit
B= Bar K= kg/cm 2 P= PSI
Wetted Material
0= 17-4PH 1= 316L 2= Inconel 718 + 4= Hastelloy C276 +
Series Type
Insert Pressure Code
AST46PT A 0500 P 3 1 000 T G
+ Consult factory on availability
Electrical
T= 2ft. 18 AWG wires U= 4ft. 18 AWG wires W= 2 Meter 18 AWG wires
Outputs
1= 0.5-4.5V ratiometric
2= 0-5V
3= 1-5V
4= 4-20mA
5= 0-10V
6= 1-6V
G= 1-10V
Pressure Range
G= Gauge Pressure**
V= Gauge Pressure (Vacuum Calibrated)**
0= Sealed Gauge up to 9,999 PSI
1= Sealed Gauge up 10,000 to 19,999 PSI
2= Sealed Gauge 20,000 PSI
** Not suitable for Class II
H
Failure State
H= High L= Low N= None
Process Connection*
A= 1/4" NPT Male (up to 10,000 PSI)
I= 1/4" NPT Female (up to 15,000 PSI)
P= 1/2" NPT Male (up to 15,000 PSI)
W= F250C Female Autoclave (10,000 to 20,000 PSI)
* for other ports contact factory, "W" not available in 316L
1
Temperature Output
1= -40 to 85°C (-40 to 185°F)
2= -40 to 125°C (-40 to 257°F)
3= 0 to 70°C (32 to 158°F)
4= -55 to 125°C (-67 to 250°F)
5= -18 to 93°C (0-200°F)
Options
000= No Options
Approval
-Z= Add “-Z” for CRN Registered to ANSI/ASME B31.3. Contact factory for material, pressure, and process connection options.
-Z