AST AST4510 Datasheet - Manual (Page 2)

www.astsensors.com
TM
© 2014 American Sensor Technologies Inc. AST4500/4510 06/18/2014.
All specifications subject to change without notice.
Pressure Ranges +
Ordering Information
AST4500
PSIG Pressure Code Feet of Water Column @ 4ºC (approx.)
0-100 00100 230.67
0-50 00050 115.33
0-30 00030 69.20
0-20 00020 46.13
AST4510
0-15 00015 34.60
0-10 00010 23.07
0-7.5* 00208* 17.30
0-5 00005 11.53
0-2.5* 00069* 5.77
0-1 00001 2.31
+ All pressures between 0-1 PSI and 0-100 PSI are available. Please consult factory. *2.5 and 7.5 PSI Sensor must be ordered in inches of H
2
O.
N
Options Cable Lengths:
140= 15 ft. (4.6 m)
075= 20 ft. (6.1 m)
074= 25 ft. (7.6 m)
004= 35 ft. (10.7 m)
130= 40 ft. (12.2 m)
065= 50 ft. (15.2 m)
003= 100 ft. (30.5 m)
050= 150 ft. (45.7 m)
Wetted Material
1= 316L / 304 / Hytrel Cable / Kynar Cord Grip
Electrical
N= Conduit fitting, Cable 6 ft.
P= Conduit fitting, Cable 10 ft.
X= Optional Length (see options)
Outputs
3= 1-5V
4= 4-20mA (2 wire loop powered)
Pressure Unit
B= Bar
H= Inches H
2
O
K= kg/cm 2
P= PSI
Pressure Measurement
Insert 5-digit pressure code
Process Connection
L= Cone
Series Type
AST4510 L 00005 P 4 1 000 -SS
Approval
(Left Blank)= UL ANSI/ISA 12.12.01 Class I Div 1 Intrinsically Safe Groups C, D (formerly UL913)
-SS= Add “-SS” for CSA157 Class I Div 1 Groups C, D Intrinsically Safe and ANSI/ISA 12.27.01 Single Seal Approval and SIRA ATEX Exia IIB
Class I, Zone 0, T4
Note: CSA approved products require case/earth ground electrical connection.
See wiring installation sheet for further details