Pressure ranges, Psig measurement, Pressure code – AST AST20PT Datasheet User Manual
Page 2: Barg measurement, Ordering information
TM
www.astsensors.com
© 2014 American Sensor Technologies Inc. AST20PT 08/12/2014.
All specifications subject to change without notice.
Pressure Ranges
+
PSIG Measurement
-14.7 to 25
++
Pressure Code
V0025
++
BARG Measurement
-1 to 2
++
Pressure Code
V0002
++
0-25
00025
0-2
00002
0-50
00050
0-5
00005
0-100
00100
0-7
00007
0-150
00150
0-10
00010
0-200
00200
0-20
00020
0-250
00250
0-35
00035
0-500
00500
0-50
00050
0-1,000
01000
0-100
00100
0-2,500
02500
0-250
00250
0-5,000
05000
0-350
00350
0-7,500
07500
0-500
00500
0-10,000
10000
0-700
00700
0-15,000
15000
0-1,000
01000
0-20,000
20000
0-1,400
01400
0-30,000
30000
0-2,000
02000
0-45,000
45000
0-3,000
03000
+
All pressures between 0-25 PSI and 0-45,000 PSI available.
++
Compound pressures up to -14.7 to 500 PSI available. Please consult factory.
Series Type
AST20PT
1
00500
P
E
3
1
H
00
A
Temperature Output Range
1= -40 to 85°C (-40 to 185°F)
2= -40 to 125°C (-40 to 250°F)
3= 0 to 70°C (30 to 158°F)
4= -55 to 125°C (-65 to 250°F)
5= -18 to 93°C (0-200°F)
Process Connection
A= 1/4” NPT Male
B= 1/8” NPT Male**
P= 1/2” NPT Male***
W= F250C Female Autoclave****
Pressure Range
Insert 5-digit pressure code
Pressure Unit
B= Bar
K= kg/cm
2
P= PSI
Outputs
1= 0.5-4.5V ratiometric
2= 0-5V
3= 1-5V
4= 4-20mA
5= 0-10V
G= 1-10V
Electrical
A= 2 ft.(0.6m)
B= 4 ft.(1.2m)
C= 6 ft.(1.8m)
D= 10 ft.(3.0m)
E= Mini DIN 43650C
I= DIN 43650A
R= 6- Pin Bendix
Y= M12x1
Wetted Material
0=17-4PH
1=316L (available up to 10,000 PSI)
2= Inconel 718 (consult factory on availability)
6= Waspalloy (consult factory on availability)
Fail Condition
N= Not Specified
H= Fail High
L= Fail Low
Options
(contact factory for additional options)
000= No Options
(for wiring information visit: http://www.astsensors.com/wiring.php)
** Not available under 50PSI, not available in 316L
*** Pressures up to 15,000 PSI
****Pressures from 10,000 to 45,000 PSI, not available in 316L
Ordering Information*
*Minimum order quantities may apply to certain configurations, please contact factory for more information.