Ventamatic EC18DVS Manual User Manual
Page 4
MaxxAir Portable Evaporative Cooler
1.0
Introduction
•
Your MaxxAir was tested 3 ways. Your unit was tested for 1. Maximum air flow at operating static pressure.
Only MaxxAir is tested in operating conditions with 2. Water and 3. Electricity before it is shipped.
•
MaxxAir is easy to operate – needs only tap water and electricity to operate.
•
MaxxAir is easy to move – roll your MaxxAir to the area you want to cool. MaxxAir comes standard with straight
and swivel / lock casters which make moving your MaxxAir a breeze.
1.1 Quick Start – Your Quick Start Information is located inside the
information packet shipped with your unit.
Look on the front of your MaxxAir packaging in a plastic sleeve.
1.2 Evap-O-Matic Tablet – Chemical Water Treatment. Operate your unit
for 2 weeks – then, flush out old water – add clean water – then add ½
Chemical Water Treatment tablet. Note: Tablet makes water foam which
can cause unit to spray water temporarily (for a day or two). You can
order more tablets by calling 1.800.433.1626.
2.0 How Evaporative Cooling Works
Keeping in mind that regular fans only circulate same temperature air -
same humidity – your MaxxAir portable evaporative cooler takes that
same existing air, combines it with evaporating water (which dramatically lowers the temperature) immediately relieving
hot, dry areas, similar to the conditions when a natural rain storm approaches, the temperature drops noticeably cooler,
because the air is saturated with water. Because your air is now saturated with water it becomes noticeably cooler. In high
humidity areas the temperature will not be as cool – however, the MaxxAir was engineered efficient to evaporate
perspiration and sweat from employees to keep them cooler.
3.0 Unpacking your new MaxxAir unit
Note: Carefully examine your MaxxAir shipping carton for damage
before opening. If your carton is damaged – notify the shipper immediately!
Your EC18” unit was shipped strapped a wooden pallet inside a cardboard box.
First remove the straps then you may open the cardboard box. Your MaxxAir
comes with a box of casters. Attach swivel casters to fan side of unit and straight
casters to pad side. Use a 3/8” wrench to attach casters.
4.0 Set-up your MaxxAir unit.
Roll your MaxxAir unit to a level surface and lock the swivel casters to prevent
accidental movement.