Ventamatic IF36 User Manual
Operating instructions, Caution: read safety rules for safe operation
®
®
VENTAMATIC, LTD. P.O. BOX 728, MINERAL WELLS, TX 76068-0728 • PHONE 800-433-1626 FAX 940-325-9311 • WWW.BVC.COM • E-MAIL: [email protected]
A leader in the ventilation industry for over 60 years, Ventamatic, Ltd. offers a complete line of air movement
products for commercial, industrial, agricultural, and residential use sold under these fine names:
OPERATING INSTRUCTIONS
Models: IF14, IF18, IF24, IF30, IF36
COMMERCIAL • INDUSTRIAL • AGRICULTURAL
HEAVY DUTY EXHAUST FAN
LOCATION OF FANS
The fan should be located in the side or end of the building away
from prevailing winds. If more than one fan is to be installed, the
fans should be placed evenly throughout the building so that a
balanced flow of air is established.
CAUTION: READ SAFETY RULES FOR SAFE OPERATION
AIR INTAKES
Adequate air intake (Net Free Air*) is required for proper operation of this fan. Air intakes should be sufficient to allow as
much air to enter the building as the fan exhausts (see NFA Required for each model on chart below).
CAUTION:
Turn off all power to fan before cleaning the unit or performing
any maintenance. The motor may start automatically. The motor
is equipped with an automatic overload protection. If the motor
overheats and stops, it will re-start automatically when it cools.
**Net Free Area (NFA) is a measurement of the unobstructed area through which air can pass freely. Adequate air intake is essential
for the fan to operate properly.
IF14
14”
120
2.65
1400
4 sq ft
17
1/4
x 17
1/4
IF18
18”
120
5.34
3000
6.5 sq ft
20
3/4
x 20
3/4
IF24
24”
120
4.35
4100
8 sq ft
28
1/4
x 28
1/4
IF30
30”
120
6.3
5500
10 sq ft
34
1/4
x 34
1/4
IF36
36”
120
5.15
9000
12 sq ft
40
1/4
x 40
1/4
NFA (INTAKE)
ROUGH
REQUIRED
OPENING
MODEL
SIZE
VOLTS
AMPS
CFM
SPECIFICATIONS SUMMARY
©2010 Ventamatic, Ltd MIFOPERINSTR 0510
Due to our continuing program of product improvement, specifications may change without notice.