Triton 9661 Operation Manual - Manual (Page 203)

6-3
M
ULTI
-C
ASSETTE
C
ASH
D
ISPENSER
O
PERATION
M
ANUAL
T
RITON
S
YSTEMS
, I
NC
.
S
ECTION
6 - M
AINTENANCE
M
ODELS
9640/9641/9660/9661
R
EPLENISHING THE
R
ECEIPT
P
APER
NOTE:
This operation can be completed with the AC
Power applied to the Cash Dispenser
1. This operation can be completed with the power
on. Open the top of the cash dispenser by un-
locking the top enclosure and pulling the hinged
door forward.
2. Remove any paper that remains in the paper path
as follows:
a. If paper remains on the roll, cut the paper
between the roll and the printer with a pair
of scissors as shown in Figure 6-2. Use the
RECEIPT PRINTER PAPER FEED BUT-
TON (Figure 6-3) to feed the paper through
the paper path until all paper comes out the
front of the printer.
NOTE:
Do not pull the paper backward through the
printer. This may leave paper fragments that can
cause paper jams.
Figure 6-2. Cut any paper between the roll and the
printer feed path with scissors.
Figure 6-3. The PAPER FEED
BUTTON.
FEED BUTTON