beautypg.com

Triton RL5000 X2 Series Installation Manual User Manual

Page 36

background image

3 6

M

ODEL

RL5000 (X2) I

NSTALLATION

G

UIDE

This unit may be equipped with more than one power cord. Disconnect All power cords prior to
Servicing! For continued fault protection, follow the correct voltage and current ratings when replac-
ing any fuses.

Route AC Power and

Communication Cable

1.

Route the AC power cord and the phone (or Cat-5) cable through either the main or alternate cable
access hole (as applicable).

2.

Connect the AC power cord and communication cable to their respective facility outlets.

NOTE: Before you start, unlock and open the control panel. Verify that the power switch on the unit’s
power supply is in the OFF (0) position. Close the control panel.

3.

Secure/plug the unused access hole with the grommet or plug provided.

See also other documents in the category Triton Equipment: