Star Water Systems S1101 - Manual (Page 7)

7
2 in. bolt
location
for toilet in
foward mount
position
OR
Side Position Forward Position
2 in. bolt
location for
toilet in side
mount
position
TOILET BOLT LOCATION
1
2
3
1. Determine how you will be placing the toilet on the
pump system. This determines the location of the long
bolts in step 2.
Note: Pump system ships preassembled in the forward
installation position.
2. If a side installation is desired, take note of the
position of the 2 in. bolts and remove the all four bolts
located around toilet inlet hole in tank.
Rotate the location of each bolt 90 degrees around the
pre-drilled toilet installation hole and reinstall. Torque
screws to 25-30 in-lbs. DO NOT over-torque screws.
3. If subflooring is installed, remove the 2 in. bolts located
around the toilet inlet hole in tank and replace with 3 in.
bolts from hardware pack.