Spectra Precision ProFlex 800 CORS - Manual (Page 50)

46
defined by the Recording Interval parameter on the Sessions
- Scheduling web page (see Programming Sessions on
page 46). The value you might enter on the Raw Data web
page for these messages would anyway be ignored. It
would even be overwritten with the value given to
Recording Interval when the first session starts.
• Click on the Configure button to save all the changes
made. The concatenation of the selected messages will
constitute the G-files saved in the receiver (internal
memory or USB device).
Programming
Sessions
The typical use of sessions in a CORS station consists of
defining 24 sessions representing each one-hour data
recording at a 1-second recording interval. Follow the
instructions below to create these sessions:
• Click on Sessions - Scheduling.
• Enter “00:00:00” as the Start Time, “1” as the Recording
Interval, “01:00” as the Duration and “24” as the Number
of Sessions.
• Click on the Auto Set button.
• Click on Back after the “Successful” message has been
returned b the Web Server. You can now see the list of
sessions you have just created in the Sessions table: