Spectra Precision ProFlex 800 CORS - Manual (Page 46)

42
Where:
• N for North, S for South; E for East, W for West
• “D..” for degree digits, “M..” for minute digits, “S..” for
second digits
When typing in a latitude or longitude, leading and trailing
zeroes can be omitted. Degree (°), minute (’) and second (”)
symbols can be omitted as well.
For example, typing 5 6.45 N is a valid entry for 5°
06.450000’ N.
If you use the “Deg.” angle unit, you can use signs for
directions:
• “-” sign for South (S) or West (W)
• No sign or “+” sign for North (N) or East (E)
Time Units
Time is always expressed in 24-hour format. You can choose
between the following two options:
• UTC: UTC time provided by the receiver.
• Local: Local time derived from the UTC time provided by
the receiver, taking into account the time zone read from
the computer’s regional settings.
Deg. Min.
Sec. DD°MM’ SS.SSSSS” N or
DD°MM’ SS.SSSSS” S DDD°MM’ SS.SSSSS” E or
DDD°MM’ SS.SSSSS” W
Angle Unit
Used
Latitude Format Longitude Format