3 caster wheel grease fittings, 4 caster wheel plate gap, 5 rear wheel steering grease fittings – Seed Hawk TOOLBAR 2010 User Manual

Page 49

Text mode
Original mode

Seed Hawk Manual

Tool Bar

Page 46

FIG.23

FIG.25

7.3 CASTER WHEEL GREASE FITTINGS

Lubricate two (2) fittings, #1 FIG. 23, every 50 hrs or weekly.

NOTE: One fitting is on top and the other on the bottom of the
caster wheel plate.

7.4 CASTER WHEEL PLATE GAP

Measure gap between caster wheel plates every 100 hrs. The gap, “X”, should not
exceed 1/8” (3 mm), FIG. 24. Adjust gap, if necessary, by tightening bolt on top of
caster wheel plate assembly.

7.5 REAR WHEEL STEERING GREASE FITTINGS

Lubricate Rear Wheel Steering
grease fittings every 25 hrs. There
are five (5) fittings, one (1) on top
and four (4) on the bottom, FIG.
25.