Seed Hawk TOOLBAR 2010 - Manual (Page 33)

Seed Hawk Manual Tool Bar Page 30
NOTE: The chain between the
seed and fertilizer knife is tight.
Every new Seed Hawk that is manufactured
leaves with its shank pressure set at
approximately 1200 Psi.
Dial the shank pressure down. (NOTE: The
needle on the gauge will lower.)
NOTE: All of the fertilizer knives will
decrease in penetration pressure.
Step 7 – In order to get the proper packing and
penetrating forces per field, we recommend that
you lower your shank pressure from the cab at
the beginning of each field.
Step 8 – You now know that you need to
increase your packing and penetration
pressures. Hold the shank pressure button to
change these pressures.