6 winging the 7-plex machine down – Seed Hawk TOOLBAR 2010 User Manual
Page 31

Seed Hawk Manual
Tool Bar
Page 28
4.6 WINGING THE 7-PLEX MACHINE DOWN
NOTE: Please ensure your dump line is coupled first. If your 
control box has a 7- plex wing down button please use the 
following 2 steps to lower your wings safely. Ensure control box is 
powered up with 12v. 
1. Engage the lever in the tractor cab that your green banded hoses are hooked to (which
lowers your wings), press and hold the 7-plex wing down switch until all wings are on the 
ground. 
2. Release switch and leave your lever (that your green banded hoses are hooked to) in
working position (not float).
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Ensure the Dump line gauge never exceeds 
100 PSI. Excessive amounts of pressure 
will damage the gauge. 
Yellow banded Dump line hose must be 
connected to the circuit which is plumed 
directly to the tractor reservoir. 
1
