Seca 804 User Manual

Page 15

Model 804

FEMALE NORMAL: female, normal

build, (exercising a maximum of twice a

week for 30 minutes),
MALE ATHLETIC: male and athletic,
FEMALE ATHLETIC: female and

athletic.

– Confirm your selection by briefly press-

ing the SET key.

The menu for entering age appears.

– You can increase or decrease the value

using arrow keys ▲ and ▼.

– Once the correct value has been set,

briefly press the SET key.
This concludes data entry for the per-

sonal data for one person.

Measuring with automatic person recognition

The seca 804 can use the weight to recognise whether the person standing on the scale

matches one of the stored sets of data in the four people memories. So it is not always

necessary to bend down to switch on the scale using one of the keys. To do this, the

measured weight is compared with the stored weights and, if it is within a certain toler-
ance, it is then linked to the appropriate personal memory. The current weight is then

stored again and used as the basis for subsequent measurements. As a result, the scale

is always updated if you lose weight continuously - while on a diet, for example.
Note:

When you get on the scale the first time after storing your personal data, you must first

switch on the scale using the key assigned to your data. The scale can then assign your

weight to your personal data.
– Step gently onto the scale. The vibra-

tion switch starts the scale.

se(a

8.8.8.8.8.

and

0.00

appear con-

secutively in the display. The scale is

then automatically set to zero and

ready to use.

– Step onto the scale barefoot and stand

still (see Fig. 6)
The scale measures your weight and

subsequently starts measuring the elec-

trical resistance of your body tissue.

While the measurement is being taken,

the symbol

moves across the display.

– After measurement, the scale com-

pares the measured weight with the

stored weights. If it cannot clearly as-

sign it, all personal memory symbols for

which the weights stored are close to

the measured weight flash on the dis-

play.

– If the scale cannot clearly assign your

weight, now press the key (MENU, ▲,

▼ or SET) which is assigned to your

personal data.

– Following successful measurement,

the values for BMI, body fat and body

water are displayed three times con-

secutively. The scale then switches off.

– Compare your values with the catego-

ries on pages 14 and 15.

Note:

If your determined weight is close to the stored weight of another person, it could be the

case that your measured values are assigned to a different personal memory. Check

whether the correct personal memory symbol is being displayed during the measurement.

If necessary, switch on the scale using the MENU, ▲, ▼ or SET key assigned to your

personal memory before measuring if automatic person recognition does not work.