SANDPIPER S05 Non-Metallic - Manual (Page 3)

520-211-000 2/01 Model S05 Non-Metallic Design Level 1 Page 1
Santoprene Santoprene Santoprene Santoprene Santoprene ® Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex 212°F -10°F 50° to 212°F
life. Excellent abrasion resistance. 100°C -23°C 10°C to 100°C
V V V V Virgin irgin irgin irgin irgin PTFE PTFE PTFE PTFE PTFE Chemically inert, virtually imper vious. Very few chemicals are known to react chemically with
Virgin PTFE: molten alkali metals, turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as 212°F -35°F 50°F to 212°F
chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at elevated temperatures. 100°C -37°C 10°C to 100°C
Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane High tensile material with excellent abrasion resistance. A general purpose material 210°F -40F -40°F to 210°F
with excellent resistance to most oils. 99°C -40°C -40°C to 99°C
PVDF PVDF PVDF PVDF PVDF 200°F 10°F
93°C -13°C
Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene 150°F 40°F
65°C 5°C
Nylon Nylon Nylon Nylon Nylon 120°F 32°F
48°C 0°C
Conductive Acetal Conductive Acetal Conductive Acetal Conductive Acetal Conductive Acetal 180°F 180°F 180°F 180°F 180°F -20°F -20°F -20°F -20°F -20°F
82°C 82°C 82°C 82°C 82°C -28°C -28°C -28°C -28°C -28°C
B u n a B u n a B u n a B u n a B u n a
Quality System
ISO9001 Certified
Environmental
Management System
ISO14001 Certified
INTAKE/DISCHARGE PIPE SIZE
½" NPT(Internal) or ½" BSPT
1" NPT(External) or 1" BSPT
CAPACITY
0 to 14 gallons per minute
(0 to 52 liters per minute)
AIR VALVE
No-lube, no-stall
design
SOLIDS-HANDLING
Up to .125 in. (3mm)
HEADS UP TO
100 psi or 231 ft. of water
(7 Kg/cm 2 or 70 meters)
DISPLACEMENT/STROKE
.026 Gallon / .098 liter
S05
Non-Metallic
Design Level 1
Ball Valve
Air-Powered Air-Powered Air-Powered Air-Powered Air-Powered
Double-Diaphragm Pump
Double-Diaphragm Pump Double-Diaphragm Pump Double-Diaphragm Pump Double-Diaphragm Pump
ENGINEERING, PERFORMANCE
& CONSTRUCTION DATA
CE
U.S. Patent #
5,996,627
Other U.S. Patents
Applied for
Materials Materials Materials Materials Materials
Maximum* Maximum* Maximum* Maximum* Maximum* Minimum* Minimum* Minimum* Minimum* Minimum* Optimum** Optimum** Optimum** Optimum** Optimum**
*Definite reduction in service life.
**Minimal reduction in service life at ends of range.
Operating T Operating T Operating T Operating T Operating Temperatures emperatures emperatures emperatures emperatures
For specific applications, always consult “Chemical Resistance Chart” Technical Bulletin
SandPIPER II ® pumps are designed to be powered only by compressed air.
CAUTION! Operating temperature limitations are as follows:
Air Exhaust Side View
Air Inlet Side View
190°F
88°C
-10°F
-23°C
5 0° to 140°F
10° to 60°C