beautypg.com

LumaSense Technologies IS 12-S User Manual

Page 10

background image

IS 12 / IGA 12 Manual

Introduction 10

Digital interface:

switchable: RS232 or RS485 addressable (half duplex),
baud rate 2.4 up to 115.2 kBd

Display:

built-in 5 digit LED display, height 13 mm, additional function
LED’s

Resolution:

0.1 °C at interface and display,
< 0.025% of temperature range at the analog output

Isolation:

power supply, digital interface, analog output are galvanically
isolated against each other and housing

Parameters:

adjustable at the instrument or via serial interface:

emissivity ; response time t

90

; clear times t

CL

of the maximum

value storage; temperature sub range; analog output 0 to 20
or 4 to 20 mA; switch points for limit contacts; °C or °F;
interface RS232 or RS485; address; baud rate; test current

output

additionally (only adjustable via interface):

key lock, wait time, recalibration (with special software)

Emissivity :

0.100 to 1.000 in 1/1000 steps

Exposure time t

90

:

1 ms (at “L” temperature ranges with dynamical adaptation at

low signal levels); adjustable at 0.01 s; 0.05 s; 0.25 s; 1 s; 3 s; 10 s

Maximum value storage:

built-in single or double storage. Clearing with adjusted time t

clear

(off; 0.01 s; 0.05 s; 0.25 s; 1 s; 5 s; 25 s), extern, via interface or
automatically with the next measuring object

Limit switches:

2 relay outputs (switch-over relay contacts), switch power max.
30 W (I

max

: 1 A, U

max

: 60 V DC)

Switch hysteresis (valid for both contacts): ±2 ... ± 20 °C
Rise and fall times: exposure time of the pyrometer + 2 ms

Accuracy*:
( = 1, t

90

= 1 s, T

amb.

= 23 °C)

up to 1500 °C: 0.3% of measured value in °C + 1 °C

above 1500 °C: 0.5% of measured value in °C

Repeatability:
( = 1, t

90

= 1 s, T

amb.

= 23 °C)

0.1% of measured value in °C + 1 °C

Scanner adjustments:
(only IS 12-S and IGA 12-S):

adjustable scanning angle:

0 to 4°

adjustable scanning frequency:

4 to 10 Hz

Control panel:

4 keys, operate with tip of ball-point pen

Protection class:

IP65 (DIN 40 050)

Ambient temperature:

0 to 70 °C at housing

Storage temperature:

-20 to 70 °C

Relative humidity:

non condensing conditions

Weight:

2.2 kg

Sighting:

built-in parallax free thru-lens view finder,
optionally with an additional built-in laser
targeting light (max. power level < 1 mW,

= 630-680 nm, CDRH class II)

CE-label:

according to EU directives about electromagnetic immunity

This manual is related to the following products: