LumaSense Technologies IS 320 - Manual (Page 5)

IS 320 • IGA 320 Manual General 5
1 General
1.1 Information about the user manual
Congratulations on your LumaSense Technologies, Inc. IMPAC brand pyrometer purchase!
Please read this manual carefully, step by step, including all safety, security, operations and
maintenance notes, before installing and using your pyrometer, as this manual is an important
source of information and reference. Keep this manual in an easily accessible location to avoid
handling errors. When operating the instrument, be sure to follow all general safety instructions
(see Section 1.2, Safety).
Please also read all included accessory and component manuals.
Should you require further assistance, please call our customer service hotline in Frankfurt,
Germany, +49 (0)69 9 73 73-0 or +1 800-631-0176 in the U.S.
1.1.1 Legend
Note: The note symbol indicates tips and useful information in this manual. All notes
should be read to effectively operate the instrument.
Attention: This sign indicates special information which is necessary for a correct
temperature measurement.
Warnings and Cautions: The general warnings and cautions symbol signifies the
potential for bodily harm or damage to equipment.
MB Shortcut for Temperature range (in German: Messbereich)
1.1.2 Terminology
The used terminology corresponds to the VDI- / VDE-directives 3511, part 4.
1.2 Safety
This manual provides important information on safely installing and operating the
pyrometer. Several sections of this manual provide safety warnings to avert danger. These safety
warnings are specified with a warning symbol. You must read and understand the contents of
this manual before operating the instrument even if you have used similar instruments or have
already been trained by the manufacturer.
It is also important to continually pay attention to all labels and markings on the instrument and
to keep the labels and markings in a permanent readable condition.
Warning: The pyrometer is only to be used as described in this manual. It is
recommended that you only use accessories provided by the manufacturer.
In addition, signs and markings on the device are to be observed and maintained in a legible
condition.