Handling exception, 6 handling exception – LT Security PTZIP772X20IR User Manual
Page 67

User Manual of 5 Inch Network Speed Dome
66
7. Click
to save the settings.
Figure 6-48 Alarm Output Settings
6.6.6 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the speed domes.
Steps:
1. Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1
Configuring Motion Detection.
This manual is related to the following products: