Configuring text overlay settings, Onfiguring and, Andling – LT Security PTZIP772X20IR User Manual
Page 58: Larms, 6 configuring and handling alarms, 3 configuring text overlay settings
User Manual of 5 Inch Network Speed Dome
57
6. Click
to activate above settings.
6.5.3 Configuring Text Overlay Settings
Purpose:
You can customize the text overlay.
Steps:
1. Enter the Text Overlay Settings interface:
Configuration > Advanced Configuration > Image > Text Overlay
2. Check the checkbox in front of textbox to enable the on-screen display.
3. Input the characters in the textbox.
4. Use the mouse to click and drag the red text frame
in the live view
window to adjust the text overlay position.
5. Click
.
Note:
There are up to 4 text overlays configurable.
Figure 6-39 Text Overlay Settings
6.6 Configuring and Handling Alarms
Purpose:
This section explains how to configure the network speed dome to respond to alarm
events, including motion detection, external alarm input, tamper-proof and
exception. These events can trigger the alarm actions, such as Notify Surveillance