Configuring 802.1x settings – LT Security PTZIP772X20IR User Manual
Page 40

User Manual of 5 Inch Network Speed Dome
39
Figure 6-16 SNMP Settings
2. Check the corresponding version checkbox (
,
,
) to enable the feature.
3. Configure the SNMP settings.
Note:
The configuration of the SNMP software should be the same as the settings
you configure here.
4. Click
to save and finish the settings.
6.3.6 Configuring 802.1X Settings
Purpose:
The speed dome supports IEEE 802.1X standard.
IEEE 802.1X is a port-based network access control. It enhances the security level of
the LAN. When devices connect to this network with IEEE 802.1X standard, the
authentication is needed. If the authentication fails, the devices don’t connect to the
network.
This manual is related to the following products: