LT Security LTD2432MD User Manual

Page 63

Text mode
Original mode

DVR User Manual

Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC.

Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR’s Main MenuSetupNetwork interface

to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the

same as the PC. If using DHCP, please enable DHCP in the DVR and router.

Step 4: After finishing the above information, users can enter LAN IP and http port in the Safari browser. For example: input

http://192.168.1.100:81(here 192.168.1.100 is LAN IP of DVR, 81 is the http port of DVR). Click “ ”button, the browser will
download Active X control as shown below:

This manual is related to the following products:

LTD2424MD