Hardware installation, Install hard drive &dvd writer, Install hard drive – LT Security LTD2432MD User Manual
Page 10: 2 hardware installation, 1 install hard drive &dvd writer, 1 install hard drive
DVR User Manual
4
2
Hardware Installation
Notice: Check the unit and the accessories after getting the DVR.
Please disconnect the power before being connected to other devices. Don't hot plug in/out
2.1 Install Hard Drive &DVD Writer
2.1.1 Install Hard Drive
Notice: 1. This series support four SATA hard drives or support three SATA hard drives plus one DVD writer. (User can also
choose to install eight SATA hard drives or four SATA hard drives plus one DVD writer. Here take eight SATA hard drives installation
for example). Use the hard drive the manufacturers recommend specially for security and safe field. Please refer to “Appendix C
Compatible devices”.
2. Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate Recording
Capacity”.
Step 1: Unscrew and open the case and then unscrew the screws in the both sides to take out of the upper iron bar as shown
below:
Step 2:
Put the HDD under the lower iron bar and let the screw holes of the HDD aim at the iron bars’. Then screw firmly and
connect the power and data cables. The pictures are shown as follows: