Main monitor, Fig 4-8 live configuration-host monitor, 2 main monitor – LT Security LTD2432MD User Manual

Page 27

DVR User Manual

Step3: in this interface, user can adjust brightness, hue,

saturation and contrast in live; click “default” button to

resort default setting; click “OK” button to save the

setting.

Step4: user can setup all channels with same parameters,

tick off “all” to do relevant setup.

Fig 4-7 live-color adjustment

4.2.2 Main monitor

Step1: enter into system configurationlive configurationmain monitor; refer to Fig 4-8:
Step2: select split mode: 1Ч1、2Ч2、2Ч3、3Ч3、4Ч4, 5Ч5, 6Ч6 and channel

Step3: dwell time: the time interval for a certain dwell

picture display switching to next dwell picture display

Step4: while selecting the split mode, user can setup the
current picture group. Click

button to setup the

previous channel groups of dwell picture and click

button to set the latter channel groups of dwell picture.

Fig 4-8 live configuration-host monitor

This manual is related to the following products:

LTD2424MD