HATZ Diesel 4H50TIC User Manual
Page 87

Type of fault
Possible causes
Remedy
Chapter
The starter does
not switch on and
the engine does
not turn.
Irregularities in the
electrical equip-
ment:
▪ Battery and/or
other cable con-
nections are in-
correctly con-
nected.
▪ Cable connec-
tions are loose
and/or oxidized.
▪ Ground connec-
tion between the
chassis and en-
gine is corroded.
▪ Battery is faulty
and/or not load-
ed.
▪ Faulty starter.
▪ Faulty relay,
monitoring ele-
ments, etc.
Check the electri-
cal equipment and
their components.
Contact Hatz serv-
ice.
3.2.4 Elec-
trical equip-
ment,
page 18
The engine starts,
but does not con-
tinue running after
the starter is
switched off.
Machine is not un-
coupled.
If possible, sepa-
rate the engine
from the machine
by uncoupling it.
Fuel prefilter is
clogged.
Change the fuel
prefilter.
8.2.12
Changing
the fuel pre-
filter,
page 74
Fuel fine filter is
clogged.
Change the fuel
fine filter.
8.2.13
Changing
the fuel fine
filter,
page 77
Fuel supply is inter-
rupted.
Systematically
check the entire
fuel supply.
Faults
4H50TIC
88
Operator's Manual
HATZ