HATZ Diesel 4H50TIC - Manual (Page 15)

Maintenance work
Maintenance work that goes beyond the scope described in this manual
must only be performed by qualified technicians. We recommend that you
work with one of the more than 500 HATZ service stations.
Replacing parts
▪ When replacing defective components, we recommend that you use gen-
uine HATZ original spare parts (see the chapter 2 General information,
page 6).
▪ When disposing of parts that can no longer be used, do so in accordance
with local environmental regulations or send them to a recycling center.
Measures following maintenance and troubleshooting
▪ Securely reconnect loose electrical connections; check that the electrical
components and equipment are functioning properly.
▪ Check the entire machine for foreign bodies; remove any foreign bodies.
Safety instructions for maintenance work
DANGER
Danger of explosion from flammable cleaning agents.
Cleaning with benzene is an explosion hazard. It is highly flam-
mable, can become electrostatically charged and can generate
an explosive gas-air mixture.
▪ Use halogen-free, cold cleaners with a high flashpoint for
cleaning.
DANGER
Fire hazard from spontaneous combustion.
Cleaning materials soaked with cold cleaner may produce heat
together with atmospheric oxygen and combust spontaneously.
▪ Collect cleaning materials soaked with cold cleaner only in
fire-proof, tightly sealed containers.
▪ Do not dispose of cold cleaner residues and used cleaning
materials with domestic waste, rather only in accordance
with manufacturer instructions.
▪ Comply with the instructions for preventing fire on the safety
data sheet for the cold cleaner.
Safety 4H50TIC
16 Operator's Manual HATZ