HATZ Diesel 4H50TIC - Manual (Page 31)

Lifting points
1 Lifting point
Transport conditions
▪ Two lifting eyes (1) are used on engines with a HATZ standard radiator.
Ensure that the load on the lifting eyes is always vertical.
▪ The lifting eyes deform when they are overloaded. If this happens, the lift-
ing eyes must be replaced and if necessary additional lifting points must
be used.
▪ When transporting the machine, follow the safety instructions.
▪ When transporting, follow the applicable safety and accident prevention
regulations of the trade associations.
▪ After delivery, check the machine for completeness and transport damage.
▪ Only transport the machine when it is switched off and has cooled down.
▪ If you have questions on transporting the machine, please contact your
nearest HATZ service station. For contact data, see the chapter 1 Im-
pressum, page 5 or www.hatz-diesel.com.
6.2 Assembly instructions
Assembly notes
HATZ diesel engines are efficient, robust and long-lived. Therefore, they are
usually installed in machines that are used for commercial purposes.
The machine manufacturer must follow the applicable regulations regarding
machine safety – the engine is a part of a machine.
Depending on the use and installation of the engine, it may be necessary for
the machine manufacturer and machine user to install safety equipment to
prevent inappropriate use. Note the following:
Transport, assembly and commissioning 4H50TIC
32 Operator's Manual HATZ